$29.99
The CTS 2x4 Pro Shooting Hanger is the perfect accessory for your CTS targets. The hanger is designed to hold a steel target at a slight angle to deflect bullet splatter downward. The spring assembly helps absorb some of the energy of your bullets reducing wear on your target. Pairs perfectly with the CTS Spike Base or Ground Base.
Features:
Holds Target at Slight Downward Angle
Heavy Duty Powder Coat Finish
All Steel Construction
Proudly Made in USA
½” Grade 8 Bolt
Steel Spring for Impact Absorption
Includes:
Hanger, grade 8 bolt, steel spring, lock nut and set knob.
$29.99
The CTS Spike Base is for the shooter looking to skip the hassle of a traditional bulky ground base. The large spike holds targets firmly into the ground and the set screw holds the 2x4 in place for a secure day at the range. It pairs perfectly with our 2x4 Pro Hanger for an ideal steel setup.
Features:
Heavy Duty Powder Coat Finish
T-Shape Spike Reduces Wobble
Thick Mild Steel Construction
Proudly Made in USA
Accepts Standard 2x4 Lumber
Includes:
Spike Base, Knob
$39.99
The CTS 18” Cardboard Target Stand accepts standard 1”x2” furring strips which are ideal for securing your favorite paper or cardboard targets with a stapler or clips. The furring strips are locked in with 2 screw knobs. Our reinforced steel handle is designed to be pounded into the ground and the large spike will anchor the entire setup.
Features:
Fits Standard 1"x2" Lumber
Heavy Duty Powder Coat Finish
Thick Mild Steel Construction
18" Spread
Proudly Made in USA
$69.99
The CTS 2x4 X Ground Base provides a wide, sturdy base for your steel shooting targets. It's a practical option for a portable target setup or for ground where driving spikes isn't suitable.
The base accepts standard 2x4 lumber and works with any CTS 2x4 hanger to support your target setup.
Approximately 22 inches by 25 inches.
$21.99
The CTS 2x4 Shooting Target Hanger Hook is a rugged yet simple steel target holder. Simply slip onto the top of a standard 2x4 and hang your target off the AR500 hook. This hanger is built to last and has a durable powder coat. On the backside of the hanger there is a loop for a tandem gong setup between two hangers for maximum versatility.
Features:
Fits Standard 2x4 Lumber
Heavy Duty Powder Coat Finish
AR500 Construction
Gong Hanger Loop on Back
Proudly Made in USA
$24.99
Add targets to your 2x4 setup with the CTS 2x4 Vertical Hanger Hook. This slide on hanger hook fits around standard 2x4 lumber and with the set screw on back can be adjusted to any height on your lumber. With an AR500 hook and a tough powder coat finish this hanger is built to last.
Features:
Fits on Standard 2x4 Lumber
AR500 Hook
Heavy Duty Powder Coat Finish
Proudly Made in USA
$39.99
The CTS 4x4 Folding Leg Bracket is a versatile start to any home range. The bracket system installs onto standard lumber using 2x4s as legs and a 4x4 for the horizontal beam. Simply removing the bolt and wing nut allows the legs to collapse for easy transport. This works great with gong targets and chains or with our Horizontal Pro Target Hangers to create your own plate rack/shooting gallery.
Features:
Fits Standard 2x4 and 4x4 Lumber
Easy Transport Collapsing Legs
Heavy Duty Powder Coat Finish
Proudly Made in USA
Includes:
Leg brackets and Hardware
$79.99
The CTS 2x4 Spike Pro Kits combine three essential CTS products into one convenient package. The kit contains a 2x4 Spike Base for driving into the ground to anchor your target stand, a 2x4 Pro Target Hanger to safely and securely mount your target, and either a 6", 8" or 10" diameter CTS 3/8" Thick AR500 round target. All you need is a standard 2x4 cut to the length you desire and you are ready to hit the range!
Features:
Pistol and Rifle Rated AR500 Target
Accepts Standard 2x4 Lumber
Heavy Duty Powder Coat Finish
Proudly Made in USA
Includes:
Pro Target Hanger, Spike Base, Target and Hardware
$124.99
The CTS 2x4 X Base Pro Shooting Target Kit combines an X Ground Base, Pro Target Hanger and 3/8-inch AR500 round target in one convenient package. The wide base provides stable footing, while the hanger supports your target.
Choose an 8-inch, 10-inch or 12-inch round target. Use standard 2x4 lumber cut to your desired length to complete your setup.
$229.99
The CTS DIY 3 Target Plate Rack has everything you need to put together a plate rack at your favorite shooting spot. This kit uses the CTS folding leg brackets along with standard lumber to create a sturdy base. Top that with 3 CTS Horizontal Pro Hangers to safely and securely mount the 3qty 8” or 10” CTS AR500 targets. All components are designed to be portable and set up/taken down with ease.
Features:
All Components Needed to Set Up a Steel Target Plate Rack
8” or 10” AR500 Targets
Uses Standard 2x4 and 4x4 Lumber
Heavy Duty Powder Coat Finish
Proudly Made in USA
Includes:
3 Hangers, 3 Targets, Leg Brackets, and Hardware
$399.99
The CTS DIY 6 Target Plate Rack has everything you need to put together a plate rack at your favorite shooting spot. This kit uses the CTS folding leg brackets along with standard lumber to create a sturdy base. Top that with 6 CTS Horizontal Pro Hangers to safely and securely mount the 6qty 8” or 10” CTS 3/8" AR500 targets. All components are designed to be portable and set up/taken down with ease.
Features:
All Components Needed to Set Up a Steel Target Plate Rack
8” or 10” AR500 Targets
Uses Standard 2x4 and 4x4 Lumber
Heavy Duty Powder Coat Finish
Proudly Made in USA
Includes:
6 Pro Target Hangers, 6 3/8" AR500 Targets, Leg Brackets, and Hardware
$499.99
The CTS DIY 8 Target Plate Gallery has everything you need to set up a full shooting gallery wherever you want. This kit uses the CTS folding leg brackets along with standard lumber to create a sturdy base. Top that with 4 CTS Horizontal Pro Hangers to safely and securely mount the 4qty 8” or 10” CTS AR500 targets. Then hang four additional targets off of the CTS Shoot Through Rubber Straps attached to the backs of the hangers for a total of 8 targets to shoot at. All components are designed to be portable and set up/taken down with ease.
Features:
All Components Needed to Set Up a Full Target Gallery
8” or 10” 3/8" AR500 Targets
Uses Standard 2x4 and 4x4 Lumber
Heavy Duty Powder Coat Finish
Proudly Made in USA
Shoot Through Rubber Strapping
Includes:
4 Pro Target Hangers, 8 3/8" AR500Targets, 4 Rubber Straps, Leg Brackets, and Hardware
$39.99
The CTS Horizontal Pro Target Hanger mounts to a horizontal 4x4. The hanger simply slides over the top of the 4x4 and tightened down with a thumb screw. No need to take your other targets off to move the stand around. This Pro Hanger mounts your steel target at a 20 degree downward angle to direct bullet splatter to the ground. Utilizing a spring and bolt assembly to absorb impact energy and prolong target life. The back of the hanger also has a pair of loops for hanging a gong or use with the CTS Rubber Strap Target Hanger.
Features:
Fits on Standard 4x4 Lumber
Holds Target at 20 Degree Angle
AR500 Construction
Heavy Duty Powder Coat Finish
Proudly Made in USA
Includes:
Horizontal Pro Target Hanger, Spring, Grade 8 Bolt, Lock Nut and Set Knob.
$44.99
The CTS T-Post Pro Kit pairs a 3/8-inch AR500 round steel target with a T-Post Pro Hanger and hardware in one convenient package. Choose an 8-inch, 10-inch, or 12-inch diameter target to suit your setup.
The hanger fits securely atop most T-style fence posts. Bring your own T-post to complete the setup.
T-post not included.
$19.99
The CTS T-Post Pro Steel Target Hanger mounts your steel target on a standard T-style fence post and incorporates the CTS Pro spring-and-bolt system. Its tapered slot holds the post firmly, while the hanger positions your target at a downward angle.
A loop on the back offers another mounting option for suspending a gong between two hangers.
$44.99
The Tree hanger stand is a great choice for those who do not have framing set up to hang targets Or someone who has got a tree. Attach the stand with ratchet straps(not included) or bolt to a post(also not included). The stand allows the target to swing freely when hit and maximize sound. the stand can fit other 3/8" thick gongs but new S hooks will be needed if using a 1/2"+ plate. Laser cut AR500 construction.
$34.99
Got a gong but don't know how to hang it? The CTS gong hanger kit has you covered. Our AR500 quick attach hooks make stringing up your chain a breeze. Simply bolt the chain to the back of your favorite CTS gong target, thread the CTS quick-attach hooks through the chain, toss the chain over a horizontal post and hook it up!
Features:
2 1/4" thick grade-70 Chains, 2' each
2 grade-8 Bolts with Nuts
2 quick-attach CTS Hooks
Target not included
$59.99
CTS on ground stand holds 1X2" furring strips which secure your favorite paper or cardboard targets. The furring strips are locked in with 2 screw knobs. Easily works for indoor and outdoor set up, staking holes on all four legs allows better securing into the ground with stake. Detachable legs for ease of transport
24.5 " X 21.5" inch base
Items included:
Fully welded ground base frame
Legs
metal thumb screws
$399.99
Take your pistol and rifle training to the next level with the CTS Hostage Target! The entire kit is constructed from AR500 Steel. The Hostage target and swinging paddle are laser cut from 3/8” thick Rifle rated AR500. The target seats onto the modular CTS Mod X base which is made from ¼” AR500. The edges face the shooter for minimal surface area to distract you from your target and is able to stand up to a beating from missed shots.
Features:
Rated for:
$439.99
The CTS Triple Threat Target kit handles pistols all the way up to long range precision rifles! The entire kit is constructed from AR500 Steel. The Triple Threat target has 3 uniquely sized target zones to challenge you. A direct hit will swing the paddle out, another hit will swing it back. All Targets surfaces are laser cut from 3/8” thick Rifle rated AR500. The target seats onto the modular CTS Mod X base which is made from ¼” AR500. The edges face the shooter for minimal surface area to distract you from your target and is able to stand up to a beating from missed shots.
Features:
Rated for:
$834.99
A complete shooting gallery on one stand. The CTS Triple Threat Mod X Reactive Kit brings together a main Triple Threat target, two spinner targets and two gong targets on a modular Mod X base.
$794.99
A complete shooting gallery on one stand! The CTS Hostage Target Gallery kit handles pistols all the way up to long range precision rifles! The entire kit is constructed from AR500 Steel. Galley includes main hostage target, 2qty 6”-8” spinner targets, and 2qty 8” or 10" gong targets. All Targets surfaces are laser cut from 3/8” thick Rifle rated AR500. The targets seat onto the modular CTS Mod X base which is made from ¼” AR500. The edges face the shooter for minimal surface area to distract you from your target and is able to stand up to a beating from missed shots.
Features:
Rated for:
$14.99
The CTS T-Post Shooting Hanger locks onto the top of a standard T-post for a simple way to hang a steel target. Its compact design is constructed from laser-cut AR500 steel for durability.
Sold individually.
Recommended for long-range use. While the target and hanger are suitable for pistol use, the T-post is mild steel and should not be shot at close range.
Sign up to get the latest on sales, new releases and more …
© 2026 Complete Target Solutions. All Rights Reserved.
